TLH10UB1421R4 [TAIYO YUDEN]
Data Line Filter, 1 Function(s), 250V, 1.4A, ROHS COMPLIANT PACKAGE-4;型号: | TLH10UB1421R4 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Data Line Filter, 1 Function(s), 250V, 1.4A, ROHS COMPLIANT PACKAGE-4 LTE |
文件: | 总11页 (文件大小:521K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
LEADED COMMON MODE CHOKE COILS FOR AC LINES
WAVE
■PARTS NUMBER
*Operating Temp. : -25~+105℃(Including self-generated heat)
△=Blank space
T
L
F
1
4
C
B △
③
1
0
3
△
⑤
0
R
7
K
1
①
②
④
⑥
⑦
①Series name
Code
④Nominal Inductance
Series name
Code
(example)
102
Nominal Inductance[μH]
TLF
Common mode choke
Hybrid choke
1000
TLH
103
10000
②Dimensions of core
⑤Inductance tolerance
Code
△9
10
Dimensions of core[mm]
Code
△
Inductance tolerance
Nominal Values or higher
+100/-10%
9
10
14
24
W
14
24
⑥Rated current
Code
Rated current[A]
③Shape
Code
R54
0R8
0.54
0.8
Shape
UA△
UAH
U core, vertical type
※R=Decimal point
U core, horizontal type
UB△
CB△
CBH
U core, vertically split wound
Square type core vertically split wound
Square type core horizontally split wound
⑦Internal code
Code
K1
Internal code
Adhesive fixation
HB△
Double-square type core vertically split wound
Double-square type core horizontally split
wound
HBH
■STANDARD EXTERNAL DIMENSIONS / MINIMUM QUANTITY
/
Unit:mm(inch)
Unit:mm(inch)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
123
Unit:mm(inch)
■PARTS NUMBER
●TLH10UAH type(Hybrid choke)
Common mode inductance
[mH]
Normal mode inductance
[mH](typ.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
TLH10UAH872 0R7
TLH10UAH992 0R6
TLH10UAH123 0R5
RoHS
RoHS
RoHS
8.7
9.9
12
min.
min.
min.
0.70
0.85
1.06
1.00
1.35
1.60
0.7
0.6
0.5
250
250
250
●TLH10UA type(Hybrid choke)
Common mode inductance
[mH]
Normal mode inductance
[mH](typ.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
TLH10UA 901 2R0
TLH10UA 112 1R8
TLH10UA 152 1R6
TLH10UA 212 1R4
TLH10UA 282 1R2
TLH10UA 432 1R0
TLH10UA 622 0R8
TLH10UA 872 0R7
TLH10UA 992 0R6
TLH10UA 143 0R5
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.1
1.5
2.1
2.8
4.3
6.2
8.7
9.9
14
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
0.067
0.087
0.126
0.160
0.215
0.330
0.430
0.644
0.836
1.256
0.089
0.126
0.171
0.222
0.272
0.398
0.578
0.878
1.138
1.567
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.7
0.6
0.5
250
250
250
250
250
250
250
250
250
250
●TLH10UB type(Hybrid choke)
Common mode inductance
[mH]
Normal mode inductance
[mH](typ.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
TLH10UB 701 2R0
TLH10UB 112 1R7
TLH10UB 142 1R4
TLH10UB 232 1R2
TLH10UB 352 1R0
TLH10UB 442 0R8
TLH10UB 872 0R7
TLH10UB 972 0R6
TLH10UB 113 0R5
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.7
1.1
1.4
2.3
3.5
4.4
8.7
9.7
11
min.
min.
min.
min.
min.
min.
min.
min.
min.
0.056
0.068
0.113
0.150
0.232
0.328
0.580
0.735
0.877
0.097
0.133
0.214
0.274
0.422
0.624
0.982
1.314
1.577
2.0
1.7
1.4
1.2
1.0
0.8
0.7
0.6
0.5
250
250
250
250
250
250
250
250
250
/
●TLF10UAH type
Common mode inductance
[mH]
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
TLF10UAH872 0R7
TLF10UAH992 0R6
TLF10UAH123 0R5
RoHS
RoHS
RoHS
8.7
9.9
12
min.
min.
min.
1.00
1.35
1.60
0.7
0.6
0.5
250
250
250
●TLF 9UA type
Common mode inductance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
[mH]
TLF 9UA 102W0R8K1
TLF 9UA 202WR54K1
TLF 9UA 302WR42K1
TLF 9UA 502WR32K1
TLF 9UA 802WR25K1
TLF 9UA 103WR23K1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.0
3.0
5.0
8.0
10
+100/-10%
+100/-10%
+100/-10%
+100/-10%
+100/-10%
+100/-10%
0.5
1.0
1.5
2.5
4.0
4.5
0.80
0.54
0.42
0.32
0.25
0.23
250
250
250
250
250
250
●TLF 9UAH type
Common mode inductance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
[mH]
TLF 9UAH102W0R8K1
TLF 9UAH202WR54K1
TLF 9UAH302WR42K1
TLF 9UAH502WR32K1
TLF 9UAH802WR25K1
TLF 9UAH103WR23K1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.0
3.0
5.0
8.0
10
+100/-10%
+100/-10%
+100/-10%
+100/-10%
+100/-10%
+100/-10%
0.5
1.0
1.5
2.5
4.0
4.5
0.80
0.54
0.42
0.32
0.25
0.23
250
250
250
250
250
250
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
124
■PARTS NUMBER
●TLF14CB type
Common mode inductance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
[mH]
TLF14CB 102 1R5K1
TLF14CB 222 1R2K1
TLF14CB 332 1R0K1
TLF14CB 472 1R0K1
TLF14CB 562 0R8K1
TLF14CB 682 0R8K1
TLF14CB 103 0R7K1
TLF14CB 223 0R4K1
TLF14CB 333 0R3K1
TLF14CB 473 0R2K1
TLF14CB 563 0R2K1
TLF14CB 683 0R2K1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
5.6
6.8
10
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
0.10
0.18
0.32
0.38
0.42
0.60
0.85
1.7
1.5
1.2
1.0
1.0
0.8
0.8
0.7
0.4
0.3
0.2
0.2
0.2
250
250
250
250
250
250
250
250
250
250
250
250
22
33
2.7
47
3.6
56
5.0
68
6.5
●TLF14CBH type
Common mode inductance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
[mH]
TLF14CBH102 1R5K1
TLF14CBH222 1R2K1
TLF14CBH332 1R0K1
TLF14CBH472 1R0K1
TLF14CBH562 0R8K1
TLF14CBH682 0R8K1
TLF14CBH103 0R7K1
TLF14CBH223 0R4K1
TLF14CBH333 0R3K1
TLF14CBH473 0R2K1
TLF14CBH563 0R2K1
TLF14CBH683 0R2K1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
5.6
6.8
10
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
0.10
0.18
0.32
0.38
0.42
0.60
0.85
1.7
1.5
1.2
1.0
1.0
0.8
0.8
0.7
0.4
0.3
0.2
0.2
0.2
250
250
250
250
250
250
250
250
250
250
250
250
22
33
2.7
47
3.6
56
5.0
68
6.5
●TLF24HB type
Common mode inductance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
[mH]
TLF24HB 122 3R0K1
TLF24HB 222 2R2K1
TLF24HB 272 2R0K1
TLF24HB 332 1R8K1
TLF24HB 392 1R5K1
TLF24HB 562 1R4K1
TLF24HB 682 1R2K1
TLF24HB 822 1R0K1
TLF24HB 103 1R0K1
TLF24HB 123 0R9K1
TLF24HB 183 0R8K1
TLF24HB 273 0R6K1
TLF24HB 333 0R5K1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
2.2
2.7
3.3
3.9
5.6
6.8
8.2
10
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
0.045
0.080
0.090
0.120
0.130
0.187
0.254
0.275
0.345
0.350
0.550
0.880
1.150
3.0
2.2
2.0
1.8
1.5
1.4
1.2
1.0
1.0
0.9
0.8
0.6
0.5
250
250
250
250
250
250
250
250
250
250
250
250
250
/
12
18
27
33
●TLF24HBH type
Common mode inductance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Rated voltage AC
[V](max.)
Parts number
EHS
Inductance tolerance
[mH]
TLF24HBH122 3R0K1
TLF24HBH222 2R2K1
TLF24HBH272 2R0K1
TLF24HBH332 1R8K1
TLF24HBH392 1R5K1
TLF24HBH562 1R4K1
TLF24HBH682 1R2K1
TLF24HBH822 1R0K1
TLF24HBH103 1R0K1
TLF24HBH123 0R9K1
TLF24HBH183 0R8K1
TLF24HBH273 0R6K1
TLF24HBH333 0R5K1
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
2.2
2.7
3.3
3.9
5.6
6.8
8.2
10
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
0.045
0.080
0.090
0.120
0.130
0.187
0.254
0.275
0.345
0.350
0.550
0.880
1.150
3.0
2.2
2.0
1.8
1.5
1.4
1.2
1.0
1.0
0.9
0.8
0.6
0.5
250
250
250
250
250
250
250
250
250
250
250
250
250
12
18
27
33
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
125
LEADED COMMON MODE CHOKE COILS FOR DC AND SIGNAL LINES
LEADED COMMON MODE CHOKE COILS FOR AC LINES
■PACKAGING
①Minimum Quantity
●BU Type
Minimum Quantity[pcs]
Type
Box
-
Bulk
200
BU08RA□□
●TLH/TLF Type
Type
Minimum Quantity[pcs]
Box
TLH10UA□
TLH10UB
1000
TLF10UAH
TLF9UA□
TLF9UB□
TLF14CB□
TLF24HB□
500
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_pack_e-E02R01
LEADED COMMON MODE CHOKE COILS FOR DC AND SIGNAL LINES,
LEADED COMMON MODE CHOKE COILS FOR AC LINES
■RELIABILITY DATA
1. Operating Temperature Range
BU-RA Type
Specified Value
-25~+ 105℃
TLH, TLF Type
Test Method and
Remarks
Including temperature rise due to self-generated heat.
2. Storage temperature range
BU-RA Type
Specified Value
-40~+ 85℃
TLH, TLF Type
3. Rated current
Specified Value
BU-RA Type
Within the specified range
TLH, TLF Type
TLH10U, TLF10UA
: The maximum value of AC current within the temperature rise of 60℃
Test Method and
Remarks
TLF9UA, 14CB、24HB : The maximum value of AC current within the temperature rise of 45℃
TLF9UB
: The maximum value of DC current within the temperature rise of 45℃
4. Inductance
BU-RA Type
TLH, TLF Type
Specified Value
Within the specified tolerance
BU-RA
Measuring equipment
TLF9U :
: HP4262A
Measuring equipment
Measuring frequency
Measuring voltage
: LCR meter 4284A or its equivalent
Test Method and
Remarks
: 1kHz
: 1Vrms
TLH、TLF(except TLF9U) :
Measuring equipment
Measuring frequency
Measuring voltage
: LCR meter 4284A or its equivalent
: 1kHz
: 0.1Vrms
5. DC resistance
Specified Value
BU-RA Type
TLH, TLF Type
Within the specified tolerance
Test Method and
Remarks
Measuring equipment
: DC ohmmeter
6. Terminal strength tensile force
BU-RA Type
Specified Value
TLH, TLF Type
No abnormality
BU-RA: Apply the stated tensile force gradually in the direction to draw terminal 5N、10±1sec.
TLH10UA, TLH10UB, TLF9U : Apply the stated tensile force gradually in the direction to draw terminal.
force [N]
5
duration [s]
30±5
Test Method and
Remarks
TLH10UAH, TLF (except TLF9U): Apply the stated tensile force gradually in the direction to draw terminal.
force [N]
10
duration [s]
30±5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_reli_e-E02R01
7. Insulation resistance between wires
BU-RA Type
Specified Value
100MΩ min.
TLH, TLF Type
Applied voltage
: 50VDC (BU-RA,)
Test Method and
Remarks
: 500VDC (TLH, TLF (except TLF9UB))
: 250VDC (TLF9UB)
Duration
: 60sec.
8. Insulation resistance between wire and core
BU-RA Type
Specified Value
TLH, TLF Type
100MΩ min.(except TLH, TLF10UAH Type)
TLF :
Test Method and
Remarks
Applied voltage
: 500VDC (TLF (except TLF9UB))
: 250VDC (TLF9UB)
: 60 sec.
Duration
9. Withstanding : between wires
BU-RA Type
Specified Value
No abnormality
TLH, TLF Type
Applied voltage
: 250VDC (BU-RA)
Test Method and
Remarks
: 2000VAC (TLH, TLF (except TLF9UB))
: 500VDC (TLF9UB)
Duration
: 60sec.
10. Withstanding : between wires and core
BU-RA Type
Specified Value
TLH, TLF Type
No abnormality(except TLH, TLF10UAH Type)
TLF :
Test Method and
Remarks
Applied voltage
: 2000VAC (TLF (except TLF9UB))
: 500VDC (TLF9UB)
: 60sec.
Duration
11. Rated voltage
Specified Value
BU-RA Type
TLH, TLF Type
Within the specified range
Test Method and
Remarks
TLH, TLF (except TLF9UB)
BU-RA,TLF9UB
: 250VAC
: 50VDC
12. Resistance to vibration
BU-RA Type
Specified Value
TLF9U : Inductance change : Within ±5%
TLH, TLF Type
TLH, TLF (except TLF9U) : Appearance is no abnormality and within the specified range
BU-RA,TLH, TLF : According to JIS C 0040
Direction
: 2hrs each in X, Y and Z direction Total : 6hrs
Frequency range
Amplitude
: 10 to 55 to 10Hz (1 min.)
: 1.5mm (shall not exceed acceleration 196m/s2)
Test Method and
Remarks
Mounting method
Recovery
: soldering onto PC board
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the
measurement within 2hrs. (TLH, TLF)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_reli_e-E02R01
13. Solderability
Specified Value
BU-RA Type
TLH, TLF Type
At least 75% of terminal electrode is covered by new solder.
At least 90% of terminal electrode is covered by new solder.
TLH, TLF :
Solder temperature
Duration
: 235±0.5℃
: 2±0.5sec.
Immersion depth
: Up to 1.5 to 2.0mm from PBC mounted level.
Test Method and
Remarks
TLH, TLF :
Solder temperature
Duration
: 245±5℃
: 4±1sec.
Immersion depth
: Up to 1.0 to 1.5mm from PBC mounted level.
14. Resistance to soldering heat
Appearance : No abnormality
BU-RA Type
Specified Value
Inductance change : Within ±15%
TLF9UA : Inductance change : Within ±5%
TLH, TLF Type
TLF14CB : Appearance is no abnormality and within the specified range
TLH, TLF :
Solder temperature
: 260±5℃
Duration
: 5±0.5sec.
Immersion depth
Recovery
: Up to 1.5 to 2.0mm from PBC mounted level.
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the
measurement within 2hrs.
Test Method and
Remarks
TLH, TLF :
Solder temperature
Duration
: 260±5℃
: 10±1sec.
Immersion depth
Recovery
: Up to 1.0 to 1.5mm from PBC mounted level.
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the
measurement within 2hrs.
15. Thermal shock
Specified Value
Appearance : No abnormality
BU-RA Type
TLH, TLF Type
Inductance change : Within ±15%
TLF9UA : Inductance change : Within ±15%
TLH, TLF (except TLF9UA) : Withstanding voltage : No abnormality
Insulation resistance : No abnormality
BU-RA,TLH, TLF : According to JIS C 0025
Conditions for 1 cycle
-25℃~+85℃、keep each 30min
Test Method and
Remarks
Number of cycles
Recovery
: 10
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the
measurement within 2 hrs.
16. Damp heat
Specified Value
BU-RA Type
TLH, TLF Type
TLH, TLF :
TLF9UA : Inductance change : Within ±15%
TLH, TLF (except TLF9UA) : Withstanding voltage : No abnormality
Insulation resistance : No abnormality
Temperature : 60±2℃
: 40±2℃ (※except TLF9U)
Test Method and
Remarks
Humidity
Duration
Recovery
: 90~95%RH
: 500 hrs
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_reli_e-E02R01
17. Loading under damp heat
BU-RA Type
Appearance : No abnormality
Inductance change : Within ±15%
Specified Value
Withstanding voltage : No abnormality
Insulation resistance : No abnormality
TLH, TLF Type
BU-RA :
Temperature
Humidity
: 40±2℃
: 90~95%RH
: 500 hrs Apply rated current across windings (※except TLF9U )
Applied current
Recovery
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
TLH, TLF :
Temperature
: 60±2℃
Test Method and
Remarks
: 40±2℃ (※except TLF9U )
Humidity
Duration
: 90~95%RH
: 100 hrs
: 500 hrs Apply rated current across windings (※except TLF9U )
: Apply the following specified voltage between windings.
Applied voltage
Recovery
TLF9UA
TLF9UB
250VAC
50VDC
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
18. Low temperature life test
BU-RA Type
Appearance : No abnormality
Inductance change : Within ±15%
Specified Value
TLF9U : Inductance change : Within ±15%
TLH, TLF Type
TLH, TLF (except TLF9U) : Withstanding voltage : No abnormality
Insulation resistance : No abnormality
BU-RA,TLH, TLF :
Temperature : -25±2℃
: -40±2℃ (※TLF・TLH )
: 500 hrs
Test Method and
Remarks
Duration
Recovery
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
19. High Temperature life test
BU-RA Type
Appearance : No abnormality
Inductance change : Within ±15%
Specified Value
TLF9U : Inductance change : Within ±15%
TLH, TLF Type
TLH, TLF (except TLF9U) : Withstanding voltage : No abnormality
Insulation resistance : No abnormality
BU-RA,TLH, TL F :
Temperature : 85±2℃ (※ BU-RA)
: 105±3℃ (※ TLF・TLH)
Test Method and
Remarks
Duration
Recovery
: 500 hrs
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_reli_e-E02R01
LEADED COMMON MODE CHOKE COILS FOR DC AND SIGNAL LINES,
LEADED COMMON MODE CHOKE COILS FOR AC LINES
■PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
Precautions
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
◆Design
Precautions
1. Please design insertion pitches as matching to that of leads of the component on PCBs.
◆Design
1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will
considerations
Technical
cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.
3. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
2. Do not immerse the entire inductor in the flux during the soldering operation.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to
Precautions
soldering heat, etc. sufficiently.
◆Recommended conditions for using a soldering iron
・ Put the soldering iron on the land-pattern.
・ Soldering iron's temperature - Below 350℃
・ Duration - 3 seconds or less
・ The soldering iron should not directly touch the product.
◆Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
Technical
considerations
◆Recommended conditions for using a soldering iron
If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade
the reliability of the products.
4. Cleaning
Precautions
◆Cleaning conditions
1. TLF type
Please contact any of our offices for about a cleaning.
5. Handling
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. TLF type
Precautions
Please do not add any shock or power to a product in transportation.
◆Packing
1. Please do not give the product any excessive mechanical shocks.
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading /
fragile item).
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Mechanical considerations
Technical
1. There is a case to be damaged by a mechanical shock.
2. TLF type
considerations
There is a case to be broken by a fall.
◆Packing
1. There is a case that a lead route turns at by a fall or an excessive shock.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_prec_e-E02R01
6. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・ Recommended conditions
Precautions
Ambient temperature : 0~40℃
Humidity : Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, the solderbility of electrodes decreases
gradually, so the products should be mounted within one year from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_leaded_prec_e-E02R01
相关型号:
TLH128J010C1C
CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 10V, 1200uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
TLH187K075C1C
CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 75V, 180uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
TLH187M075C1C
CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 75V, 180uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
TLH397J015C1B
CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 15V, 390uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明